Kylin V10部署GlusterFS全攻略

一.服务器ip及挂载目录目录服务器/root/sdc10.0.1.106/root/sdb1.1. 格式化并挂载 /dev/sdcmkfs.xfs -f /dev/sdc mkdir -p /root/sdc mount /dev/sdc /root/sdc echo /dev/sdc /root/sdc xfs defaults 0 0 /etc/fstab df -h /root/sdc1.2 格式化并挂载 /dev/sdmkfs.xfs -f /dev/sdb mkdir -p /root/sdb mount /dev/sdb /root/sdb echo /dev/sdb /root/sdb xfs defaults 0 0 /etc/fstab df -h /root/sdb2.导入glusterfs离线部署包1.解压文件tar -xzf glusterfs-kylin-v10-offline.tar.gz2.解压后cd rpms/3.执行命令自动处理包内依赖yum localinstall -y *.rpm4.验证gluster --version rpm -qa | grep gluster5.启动 glusterdsystemctl start glusterd systemctl enable glusterd systemctl status glusterd6.创建 brickmkdir -p /root/sdc/brick17.创建并启动卷(卷名可根据实际填写)gluster volume create vol_data $(hostname):/root/sdc/brick1 force gluster volume start vol_data gluster volume info8.挂载卷mkdir -p /mnt/gluster_data mount -t glusterfs localhost:/vol_data /mnt/gluster_data echo localhost:/vol_data /mnt/gluster_data glusterfs defaults,_netdev 0 0 /etc/fstab9. 验证echo Hello GlusterFS on Kylin V10 /mnt/gluster_data/test.txt cat /mnt/gluster_data/test.txt df -h /mnt/gluster_data10.查看磁盘df -h以下字样就是成功挂载二. 把/root/sdc及/root/sdb都挂载GlusterFS 卷 /mnt/gluster_data内存第一步创建 brick 目录mkdir -p /root/sdb/brick1第二步添加 brick 到卷gluster volume add-brick vol_data k8s-master:/root/sdb/brick1 # k8s-master 填写实际主机名字第三步验证gluster volume info # 查看卷信息应该显示 2 个 Bricks # 查看挂载容量应显示总容量 df -h /mnt/gluster_data这样就挂好了